Know about Optical fiber connector.

Optical fiber connector provides an extensive line of high-performance fiber optic connectors for termination of the end of an optic fiber cable and enables quicker connection and disconnection. The Optical fiber connectors mechanically couple and align the cores of fibers so that light can pass. Better connectors lose very little light due to reflection or misalignment of the fibers.

fiber-optic-connectors1

Features:
  • High Precision Ceramic Ferrule
  • High Precision Polymer housing
  • Simplex or Duplex
  • High Precision Nickel plated brass housing
  • APC Green Polymer housing with 900μm and 3mm strain relief boot
  • Low Insertion Loss
  • Low Return Loss
  • Ease of installation
  • Low cost
  • Reliability
  • Low environmental sensitivity
  • Ease of use
A variety of Optical fiber connectors like SC, ST, LC, FC, MTRJ, SMA, DNP, SMI & SC-RJ are available but SC and LC connectors are the most common types of connectors on the market. Typical connectors are rated for 500–1,000 mating cycles. The main differences among types of connectors are dimensions and methods of mechanical coupling. Different connectors are required for multimode, and for single-mode fibers.

Comments

Post a Comment

Popular posts from this blog

Basic information about IP 55.

The IP Code reflects the degree of protection as "IP" followed by two numbers; the first digit shows the extent to which enclosure s  are protected against particles and protection to others from enclosed hazards.  Characteristics of IP 55 : Protection from dirt, dust, oil, and other non-corrosive material Protection from water, up to water projected by a nozzle against FTTH box from any direction Available in aluminium, and stainless steel Available in wall-mounted, free standing and Rack mounted box Custom with cutouts, insulation, hinges, latches, or locks The rating consists of the letters IP followed by 2 digits, the first digit stands for the level of protection that the enclosure provides against solid bodies, IP 55   =  First Digit - Solids The second digit describes the degree of protection of the equipment inside the enclosure against water. IP 55    =  Second Digit - Liquids
Read more

Industrial Grade Micro Din Rail Mount Enclosure

Image
UNISOL Micro Din Rail mount enclosure is designed to support fusion splicing or direct termination of the fibers. Because of its compact and ruggedly designed case, it is suitable for industrial applications. The device includes a splice tray for fusion splicing. It is suitable for mounting in Din Rail mount enclosure s where there are space constraints inside PLC’s and also suitable for CCTV & surveillance applications. The Unisol Micro panel is ideal for use in a wide range of industrial applications. The industrial design makes it highly suited for use in Machine Building, Transportation, Alternative Power Generation, Power Transmission & Distribution, and Oil & Gas markets, as well as more general use in the enterprise, buildings and other applications. Unisol developed the Nano, Micro, Miniature & also customization series Din Rail mount enclosure s. These economical series of enclosures are the perfect choice for terminating fiber data cables where the
Read more

Single-mode and Multimode fiber optic patch cords

Image
Fiber optic patch cable s, also known as fiber optic cable jumpers or fiber patch cords, are transmission media usually made of glass used to transmit data via light. In recent years, it has become apparent that fiber optic patch cables are steadily replacing copper wire as an appropriate means of communication signal transmission. There are two main types of fiber optic patch cables: single-mode and multimode fiber patch cable. This post will make a comparison between single-mode and multimode fiber patch cable from four aspects: core size, transmission speed and distance, color code, and application. Core Size The core of all fiber cables carries light to transmit data. The main difference between single-mode and multimode fiber patch cables is the size of their respective cores, as shown in the above picture. Single-mode fiber optic cable has a core of 8 to 10 microns. In single-mode cables, light travels toward the center of the core in a single wavelength. Multimode
Read more